Krause Primor 2060 M
Straw Blowers & Bale Feeders with Mechanical Beater Primor 2060 M
Double tap to zoom
The feed rotor is driven by the Polydrive belt-drive system with hydraulic engagement, which requires little power at startup. This design allows the turbine to act like a flywheel, providing the feed rotor with enough power to efficiently process more difficult products.
Driven by the Polydrive® system, the feed rotor operates at 400 rpm allowing material to be pulled from the bale without over-cutting. This high speed reduces the risk of wrapping long-stranded products and delivers uniform material length and consistency.
A 60” blower that utilizes two different blade lengths produces a variable discharge that evenly disperses material for uniform coverage. The two-speed drive used when feeding reduces power consumption.
The versatile swivel discharge will discharge to the left, right or rear of the Primor, allowing use in difficult-to-access areas. Controlled from the tractor, bedding can be blown up to 42’ through a full 300° range.
|Linkage||3-point mounted cat 2|
|Capacity - no extensions (m3)||2|
|Capacity - no extensions (cu.ft)||76|
|Number of feed rotors||1 (POLYDRIVE)|
|Overall width (m)||1.88|
|Overall width (feet)||6'2"|
|Overall length (m)||2.89|
|Overall length (feet)||9'6"|
|Length behind feed rotor (m)||1.35|
|Maximum blowing distance (m)||18|
|Maximum blowing distance (feet)||60|
|Number of round bales (diameter 1.50 m) loaded||1|
|Number of round bales (diameter 1.80 m) loaded||1|
|Number of square bales (up to 2.70 m) loaded||1|
|Minimum power requirement for PTO - haylage / straw (kW)||66 / 66|
|Minimum power requirement for PTO - haylage / straw (hp)||90 / 90|
|PTO speed (rpm)||540|